Papercraft Build – Dungeon Plungin The Monsters

Dungeon Plungin Lich King Monsters ThreeAs part of getting myself back into the old paper craft miniature rhythm I had to (re)learn how to use my new cutter properly on my new PC. So for practice I decided to pull together another copy of Dungeon Plungin. I’d wanted to recreate a copy of Dungeon Plungin (DP) after my last half finished copy got soaked when the roof leaked, that was nearly 3 years ago so I’m well overdue to start a rebuild. I decided to print out and build all the monsters need for the current DP V3 and the new under development DP V4 (V3.8ish).

I’ve had some problems in the past with tall flat paper miniatures bending  under there own weight, even when using 220gsm card glued back to back. To help strengthen the taller miniatures I added a wire spine. Basically I grabbed a cheap wire garbage bag tie (mine were paper wrapped) and cut it to length . Then I glued the tie vertically from the top of the miniature to the bottom. This gives the miniature some additional rigidity, it can still be bent and flattened but hopefully wont self bend/bow when in use.

paper Miniatures Wire Spine

Wire tie in approximate location were it’s glued between front and back

I  built the DP V3 quests and monsters first, some of these already had cut files. For the practice I recreated most of the cut files from scratch. First up the Knocking Wall Quest, full of Imps, Devilings, Gremlins, Gargoyles and one minor Demon (big guy with wings). I played around with the colours on the miniatures so they are not all the same colour, other than that they are all stock standard.

Dungeon Plungin Knocking Wall Monsters

Next we have the Orcish raider and Troll Lair Quest. Instead of building the basic miniatures needed for these two quests I built the full extended pack of Orc’s, Trolls and Goblins. I haven’t counted them all but I’m sure if I wanted to I could field a fairly decent Orc based Army and I’m not even certain all the miniatures are used in those two quests, still variety is the spice of life. I once again  messed around with the colouring on a few of the miniatures.

Dungeon Plungin Orcish Raider Monster One

Dungeon Plungin Orcish Raider Monster Three

Dungeon Plungin Orcish Raider Monster Two

Dungeon Plungin Orcish Raider Monster Four

Dungeon Plungin Orcish Raider Monster Five

The next quest is the Witch of the West Wood, Onemonk created the miniatures for the quest back in 2008 so they have a more Onemonk feel and the whole quest and the monsters has a tongue in cheek feel with dire bunnies, squirrels and O-Wee-O guards. As with the other monsters in the other quests I did some minor recolours.

Dungeon Plungin Witch of the Wild Wood One

Dungeon Plungin Witch of the Wild Wood Two

Last official quest for V3 DP is the Tomb of the Lich King. No recolours this time although I did spend sometime adding backs to the skeletons and reapers, then discovered Erf_Beto had already done this, you can grab his back and front versions here and here. A long time ago I did mod some standing rats and you can see those in my builds below, you can grab those from the Oversoul Games forum.

Dungeon Plungin Lich King Monsters One

 Dungeon Plungin Lich King Monsters Two

Dungeon Plungin Lich King Monsters Three

There are 5 Quests currently for DP V4 (V3.8). Some of the quests reuse the miniatures from V3, some are a mix and others are all new. For the moment you can grab all the V4 (3.8) play test stuff from the Oversoul Games forum. One of the major changes between V3 and V4 is the toughness of the monsters so the mix and levels are a little different. I did not make any mods to any of the miniatures as they are currently subject to change as the version evolves.

The first quest is the Dogface Demon quest filled with Kobolds and a single Gremlin, which I’ll grab from the ones above:

Dungeon Plungin Dogface Demons Monsters

Next Quest for DP V4 is Rock Solid, it’s your fairly normal rat, snake, spider cave quest with an earth elemental for the Boss. The rats I’ll reuse from the Lich King Quest above.

Dungeon Plungin Rock Solid Monsters

Both The Where Wolf , Castle Gryphon and Trolls Lair quest, consist of Greenskins, Wolves and a few gargoyles, no new monsters so no extra pictures for those three quests. In the base monster pack for V4 there are other monsters included either for you to create your own quests or possibly as the Oversoul crew have something planned. Below in no particular order are the additional monsters included in the base monster pack for DP V4.

Dungeon Plungin Extra Monsters V4 One

Dungeon Plungin Extra Monsters V4 Three

Dungeon Plungin Extra Monsters V4 Two  Dungeon Plungin Extra Monsters V4 Four

Dungeon Plungin Extra Monsters V4 Five

With the DP miniatures I assembled them as standard tab bases, this allows me to store the monsters in a smaller space and perfectly flat plus make use of some new bases I’ve ordered which I’ll post about once they arrive. As for my DP set I just need to finish creating some room decorations, primarily chests and maybe a few tables. Then it’s onto the hero’s and my Dungeon Plungin set will be finished and ready for the next Friday/Saturday afternoon of board gaming with friends.

2 Responses to “Papercraft Build – Dungeon Plungin The Monsters”


  1. 1 Michael Greenhill July 9, 2013 at 3:14 pm

    Those turned out awesome!


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s




Project Status


WWII Project First Release

80%


B-tech Buildings Five

20%


Design Victorian era City

15%


Something Different

5%


Enter your email address to follow this blog and receive notifications of new posts by email.

Join 104 other followers

Content Released Under

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License.
Please Attribute to Sirrob01 with a link back to my blog

%d bloggers like this: