Papercraft Build – Sanity Studios: Orcs

I’ve built quiet a number of  Sanity Studios paper miniatures, so I thought it was time I did a review of one of their sets so I picked latest set. They have just released a very nice set of Orcs which is the first set in there Green tide army. These are the more modern take on Orcs that we have all come to expect when someone says Orc, ugly, brutish with green skins. For those who are unaware Sanity Studio’s has a set of tabletop rules to go along with their paper miniatures called Bellicose, I’ll probably do a review on rules in a separate post later on. To save me some space you can read about comparable scaling in this post. I will just mention that the Orcs stand a little taller than a Sanity Studio’s human, approximately 30mm to the eyes.

There are a total of 10 unique Orcs in the set with an additional 3 which are a mirror of the first 3 so your not wasting paper when you print them off (a nice touch).  This gives you 13 orcs across two pages. Additionally there are 3 skin tones available for each Orc, Green, Dark green and Olive. This means you can print of the pages 3 times and have 39 Orcs that are all slightly different.

Sanity Studios Orc Skin Tones

The first page contains 6 unique Orcs, wielding a variety of weapons, shields and armour. The poses are very dynamic and really convey a sense of movement in each of the miniatures. All the miniatures are very good on this first page with my favorites being Orc3 and Orc6, my least favorite is Orc2. The photo below shows the 6 Orcs in stock Green skin:

Orc1, Orc2, Orc3, Orc4, Orc5, Orc6

The 2nd page contains 4 unique Orcs and 3 mirrored Orcs (1,2 and 4), for 7 in total, the poses are likewise very dynamic across this page. My favorite from this page is Orc8 with Orc7 running a close second, I’m going to pick on Mirrored Orc2 as my least favorite. The photo below shows the 7 Orcs in stock Green skin:

Orc8, Orc7, Orc9, Orc10, 1Cro, 2Cro , 4Cro

As you can see from the above pictures the Orcs are coloured/shaded differently to David Okums work. David goes for a more comic book cell shaded look for his mini’s were as Labrat from Sanity Studios colours/shades  similar to how you would have if you were painting a metal/plastic Orc miniatures. Both styles work well on the table but I have to admit when placed side by side on the table the Sanity Studio’s mini’s do seem to “pop” a little more, but this could just be my own personal preference seeping through as they both look good even at longer distances, either way your not going to go wrong picking up work from either artist.

Sanity Orcs vs Okums Elves

The Orc’s come with a premade craftrobo/silhouette  cut file so if you have one of those cutters it’s very quick to go from pdf to a couple of units of Orcs. Unfortunately an optional Cameo layer was not included but this can be addressed using a ruler and black pen. Handcutting will be a little slower, as you can see from the above pictures the Orcs have quiet a few small shapes protruding off them which increases the time it takes to cut them out. The added detail does mean the Orcs have a better overall impact on the table.

At the moment these Orcs would be great for populating a warband for a skirmish level war game eg SoBH (this will be one of my uses). They’d also be great for a GM to use in  a dungeon for a role playing game. There’s not quiet enough to populate up a full fantasy Orc army but I know Labrat has some goblins in the works which will then make these much more usable for larger army wargames. I know from reading the Bellicose rules (were these minis are intended to be used) that in the future Sanity Studios/Labrat will be working on several other additions for the Orc army such as:

  • Goblins
  • Goblin Pedal tank
  • Hobgoblins
  • Ogres
  • Shaman
  • Orc Warlord

No idea when they will be available but Sanity Studios has been filling out there troop roster for 24-36 months now so I’m fairly confident we’ll see most of the above at some point.

The Orc set is $3.95 which is good value for money, you don’t get as many different Orcs as David puts in his sets but David appears to be the exception rather than the rule when it comes to number of paper miniatures in a release. These Orcs are also more what people think off when they think Orc so for myself they are an excellent set/instant buy and lastly and most importantly you can never have to many Orc’s :).

Have fun gaming :).

1 Response to “Papercraft Build – Sanity Studios: Orcs”


  1. 1 gc8624 March 18, 2012 at 4:52 am

    I love that last line “you can never have too many orcs” 🙂


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s




Project Status


WWII Project First Release

80%


B-tech Buildings Five

20%


Design Victorian era City

15%


Something Different

5%


Enter your email address to follow this blog and receive notifications of new posts by email.

Join 104 other followers

Content Released Under

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License.
Please Attribute to Sirrob01 with a link back to my blog

%d bloggers like this: