Posts Tagged 'paper'

Treasure Chest Half Round Lid – Papercraft

It has been a long time since I pulled together a paper model of my own. So I decided to re-use the textures from the card box’s I created for Dungeon on a treasure chest mesh I designed about 2 years ago. It’s your fairly standard cliche treasure chest design with a square base and half rounded lid.

Treasure Chest One

The card box textures give the chests a cartoon feel and I’ll be using my assembled chests with Dungeon Plungin. The chests themselves are about 1 x 3/4 x 1 inch (length x width x height). I’ve included 3 different metal strapping colours, gold, silver/metal and copper. I assembled the layered PDF using Scribus and then used Chez/Mel ebbles fix to make the layers only print what you have turned on (Big thanks to Ebbles for sharing the fix).

Treasure Chest TwoFigures by Dungeon Plungin, Tile by Inked Adventures

If you’d like the files here they are:

Treasure Chest Half Round

Treasure Chest Instructions

Studio File on Dropbox

Have fun gaming 🙂

Papercraft Build – Inked Adventures Dungeon Cut-Up Basic

Inked Adventures Dungeon 4 (S01)I have a real soft spot for nostalgic themed games, papercraft or artwork, this little build fills two of those. Ever since Inked Adventures released their basic Dungeon cup setup I’ve been wanting to build enough for a dungeon layout. So I put some time aside over the past few weeks  and have now built enough tiles to populate a fairly decent sized dungeon, I can see I need to create a few more tiles but for the most part I’m done. As you can tell by the release date it’s taken me a fair bit of time to get around to building these, some of this relates to me trying to find a good material to mount tiles to but I’ll mention more below on that.

All Inked adventure tiles are hand drawn which I find a very nice look. There are 41 pages of dungeon goodness contained in this pack; rooms, corridors, stairs, trap tiles, 2d doors and 3d standup doors multiple versions of both. The beauty of the Dungeon Cut-Up set is even if your not into altering dungeon segments using GIMP/Photoshop, Billiam from Inked Adventures  has created this set so you can use a pair of scissors and glue to create your own custom tiles. There are 4 pages of “extra” bits which you can use to either decorate your tiles permanently by sticking them down directly to the tiles or by turning them into loose tiles you can add mid game.

Inked Adventures Dungeon 3 (S01)Layout Example – From an angle

For my set I stuck with components that are multiples of 2inches, 3inches or 6 inches. This will make it simpler to use for Dungeon plungin and Basic fantasy, although I might make a few special rooms that don’t conform to these sizes later on. For the moment I’ve created 8 – 6×6 rooms, 8- 6×2 corridors, 2 – 6×1 corridors, 4 L and T junctions, 2 X junctions, 4 dead ends, 14 small doors, 2 double doors, 2 double joiners, 4 double rockfalls and 2 large pit traps.

Inked Adventures Dungeon 1 (S01)Bits created so far laid out

The rooms I created from the parts supplied by Billiam although I did a fair chunk of altering in Gimp to make them fit a 6×6 square. Other than the room with blue squares you could replicate most of the room designs with a pair of scissors, glue and  a little ingenuity or simply use the ones that come with the bundle (12 rooms included).

Inked Adventures Dungeon 2 (S01)Example Layout – Top Down

I mentioned at the top I’d been putting of creating these as I’ve never really found a suitable substrate for mounting tiles to. I’ve tested quiet a number of crazy ideas in my time from rubber carpet tiles to magnetic sheet. Not sure if it’s just the extreme weather down under but I’ve found all glues that are easy to use for tile creation (read spray glue even the good 3m stuff) do eventually fail, 3m takes the longest at around the 1-2 year mark.

Inked Adventures Dungeon 6 (S01)Kitchen mat backing, simply double sided taped on

After years I’ve finally narrowed it down to two methods, the first I mentioned in my city build thread 8mm PVC foamboard. A little heavy duty for this application plus chews up extra storage space so I’ve simply used grey boxboard 1400gsm (basically what commercial game boards are made from) and printed directly to sticker sheet, stuck the tiles down then cut around the whole lot giving a nice neat tile. To prevent slipping on smooth tables I used double sided tape to a fix non-slip kitchen mat to the backs. Nothing to out of the ordinary and it’s been done before but I’ve found this one of the better solutions for DIY tiles; No spray glue mess, No warping from glue, No lifting , Reasonably slip proof on a table and lastly they don’t take up to much room to store. My current dungeon tiles fill about 1/3 of an  A4 document box. To give the doors some weight I stuck them down to some thick (2mm) magnetic sheet, this will also let me stick them to the inside of the lid of the storage box later on to protect them during storage.

Inked Adventures Dungeon 5 (S01)I’ll add some dividers etc later on but just to give an idea on storage

If your not sure you like the style of the tiles or simply want to give them a try there is a free sampler pack which should give you an idea of what to expect. I did this myself while experimenting with tile mounting techniques, once I had a solution I grabbed the full set and haven’t been disappointed. I even grabbed the square tile version although I haven’t used them. I should probably mention that Inked Adventures has released some freebies for this set so grab those as well as they’ll give you more options.

Inked Adventures Dungeon 4 (S01)The whole example layout – yep missed a door on the right

As always have fun building and gaming and I hope to get some more posts up shortly, I have 6 projects 90% complete….I should probably focus on one project at a time rather than starting six at once :).

Papercraft Build – Steam Ram

Mayhem in Paper Steam Ram Variant F(1)Back in April Squirmydad from Mayhem in Paper released the Steam Ram. At the time I picked up the model with the plan to build a Steampunk army around a couple of them. I’ve finally got around to building two and thought I’d do a review/build post about the Steam Ram.

Once you have purchased the Steam Ram for the very reasonable price of $3.95, you’ll receive a zip which contains:

  • A single layered version of each colour (brown, dark grey, light grey and green) at 28/30mm scale
  • A layered version of the above so you can turn guides and other bits off which is great for customizing
  • A single layered version of each colour (brown, dark grey, light grey and green) at 15mm scale
  • A single layered version of each colour (brown, dark grey, light grey and green) at 15mm scale with all guides off
  • Assembly Instructions and a Card modelling basics file.

On top of this if you own a craftrobo/silhouete/cameo you can slip over to the Mayhem in Paper website and pickup the GSD files for the cutter. All round this is an absolute pile of stuff for the purchase price but as you look through the Instructions and files you’ll notice that Squirmydad has also included parts not just for one model but for at least four different versions. Although with the parts this actually equates to a lot more options, here are the four basic ones easily constructed from the instructions:

  • Wheeled with Main Gun
  • Tracked with Main Gun
  • Wheeled with Top Machine Guns
  • Tracked with Top machine Guns.

Steam Ram Mayhem In Paper Variant A_C

I’ve borrowed the above images from the Instructions (copyright Mayhem in Paper)

The model itself is well laid out and all the parts are easy to identify. If you are hand cutting the model do be aware that not all the parts are used when assembling a Steam Ram so make sure you check the instructions and see what parts are needed for the version your planning to build before just cutting everything out. The 30mm sized Steam Ram is spread across 4 pages but for a single tank build you’ll only need to use about 3 pages of parts.  I found the colouring of the ram to be perfect not to dark and not to light scaling wise the ram should be perfect to use with 28mm miniatures. It did take me around 4-5 hours to finish each Ram, they mainly took this long as I was building very carefully and ensuring every join and part was edged, I even sanded a couple of parts to ensure they were perfectly perpendicular. So if your used to assembling card models you should be able to pull a Ram together much more quickly.

I did make some slight modifications to the two tanks I constructed. Firstly I centralized the gun box on the front but then cut out the driver window and glued this to the left of the gun box. I then added both machine guns to the top but set these towards the rear and facing left and right to provide some flanking protection to the tank. Naturally I had to build the tracked version and later on I might add some unit markings when I have more of a feel/theme for the army.

Mayhem in Paper Steam Ram Variant F(1)

Mayhem in Paper Steam Ram Variant F(3)You can see in the above picture  how I made use of some of the extra hatches that were included with the Steam Ram to add hatches to the top of the machine gun turrets. I am really happy with how the Steam Ram looks on the table and a pair of them really do look intimidating when I was in no way pretending to push them across a table in formation 🙂 .

Mayhem in Paper Steam Ram Variant F(2)

I actual had the urge to create some fan art for the Steam Ram, this ended up being  some desktop wallpapers and a Kindle screensaver image. First up the wallpapers I did two versions a widescreen 1920×1080 and a 4:3 aspect ratio 1600×1200 version.  I am happy with how the wallpapers came out although I’m not sure anyone would actual use them as wallpaper. However they were fun to make and have a Steampunk/Victorian era feel. For want of a better name I’ve called my Steam Ram “Variant F”, Lord Hamilton Squirmydad had already written into the short back story for the model.

Mayhem in Paper Steam Ram 1600x1200 (small2)

1600×1200 version – Link to Full Size

Mayhem in Paper Steam Ram 1920x1080(small2)

1920×1080 version – Link to Full Size

Lastly I pulled together a quick version for a Kindle Screensaver. The image below will appear slightly washed out but it has been colour balanced to look okay on an e-ink Kindle not a computer monitor :). I’ve uploaded the below on my kindle and it now cycles through in my screensavers and if anything still appears a little dark (note you do need to jailbreak your kindle to use custom screensavers).

00006_Card_Steam_Ram

Click the above and then right click save as

As you can probably tell I really enjoyed building the Steam Rams and the customization options available in the PDF’s is huge with a large variaty of models achievable from just the base included parts. As I mentioned above I plan on building an entire Steam punk army around these two models and then using either Defiance VG or No Limits to spec the army out so watch out for more models/miniatures and eventually army lists in the coming months. If you haven’t already done so this model is well worth the money so head over to RPGNOW and grab a copy you wont be disappointed.

Hope you enjoy your Steam Ram, I’m going to go back to not pushing mine around a table in formation 🙂 .

Snow Tundra Tiles/Terrain

Snow Tundra Terrain Tiles

The Cardboard Warriors forum hoard 104 was Xmas Wars and as I’ve always wanted to try my hand at creating some terrain I thought some Snow Tundra tiles would be a nice start. It turned out to not be as easy as I hoped as getting some form of texture into a white snow background is very challenging.

First up I sorted through my skiing photos looking for a good snow texture, unfortunately real snow when used as a texture looks very boring basically you may as well just go and cut out 6 inch squares from plain white card. So I took a segment of particularly interesting textured snow from one of my photos, duplicated it and then bump mapped and played around with the colours until I got a base texture I was pretty happy with. I then added an overlay of irregular white shapes to represent blown snow drifts and then finally placed on some rocks, logs, grass tops and a frozen pond (sorry no river it was beyond me, plus no time). I’m fairly happy with how the tiles turned out although the shadows around the rocks didn’t really work the way I wanted but overall they look good on the table. I turned the whole thing into a layered PDF and with the bits I’ve put in you can get about 8-9 fairly unique tiles.

Snow Tundra Terrain TilesReady for Xmas Wars miniatures to be deployed

I also put together a quick snow covered tri-fold pine tree, I changed the colour a little on the tree so there is a green/green tree and blue/green tree in 3 sizes; 5 3/4, 4 3/4 and 3 inch tall versions. I only had time to put together one tree texture so all the versions use the same texture but I’m very happy with how they turned out as I don’t think there are any snow covered pine trees out there in the war gaming paper tree world. I did make the little 1/3 base circle bits separate so if you like you can easily integrate my trees with one of the commercial snow terrain sets around the place.

Snowy Paper Pine Trees

Three Sizes of Snow Covered Pine Trees

I’ll be including my Snow Tundra tiles in hoard 104 but they are available below  for download as well. I’ve included both a Cameo and SD cutfiles,  Unfortunately I cant test the Cameo file so use with caution, if they do work okay please let me know in the comments below.

The below is a zip file but I’ve had to rename it as an odt so right click save as and then rename the extension .zip once downloaded.

All Zipped – Sirrob01 Snow Tile Final

I’ve only put the cutfiles in the zip as I have rename those anyways but below are just the PDF’s.

PDF – Snow Tiles and Pine Trees

PDF Instructions – Pine Tree Instructions

Enjoy 🙂

Papercraft Build – Sanity Studios: Orcs

I’ve built quiet a number of  Sanity Studios paper miniatures, so I thought it was time I did a review of one of their sets so I picked latest set. They have just released a very nice set of Orcs which is the first set in there Green tide army. These are the more modern take on Orcs that we have all come to expect when someone says Orc, ugly, brutish with green skins. For those who are unaware Sanity Studio’s has a set of tabletop rules to go along with their paper miniatures called Bellicose, I’ll probably do a review on rules in a separate post later on. To save me some space you can read about comparable scaling in this post. I will just mention that the Orcs stand a little taller than a Sanity Studio’s human, approximately 30mm to the eyes.

There are a total of 10 unique Orcs in the set with an additional 3 which are a mirror of the first 3 so your not wasting paper when you print them off (a nice touch).  This gives you 13 orcs across two pages. Additionally there are 3 skin tones available for each Orc, Green, Dark green and Olive. This means you can print of the pages 3 times and have 39 Orcs that are all slightly different.

Sanity Studios Orc Skin Tones

The first page contains 6 unique Orcs, wielding a variety of weapons, shields and armour. The poses are very dynamic and really convey a sense of movement in each of the miniatures. All the miniatures are very good on this first page with my favorites being Orc3 and Orc6, my least favorite is Orc2. The photo below shows the 6 Orcs in stock Green skin:

Orc1, Orc2, Orc3, Orc4, Orc5, Orc6

The 2nd page contains 4 unique Orcs and 3 mirrored Orcs (1,2 and 4), for 7 in total, the poses are likewise very dynamic across this page. My favorite from this page is Orc8 with Orc7 running a close second, I’m going to pick on Mirrored Orc2 as my least favorite. The photo below shows the 7 Orcs in stock Green skin:

Orc8, Orc7, Orc9, Orc10, 1Cro, 2Cro , 4Cro

As you can see from the above pictures the Orcs are coloured/shaded differently to David Okums work. David goes for a more comic book cell shaded look for his mini’s were as Labrat from Sanity Studios colours/shades  similar to how you would have if you were painting a metal/plastic Orc miniatures. Both styles work well on the table but I have to admit when placed side by side on the table the Sanity Studio’s mini’s do seem to “pop” a little more, but this could just be my own personal preference seeping through as they both look good even at longer distances, either way your not going to go wrong picking up work from either artist.

Sanity Orcs vs Okums Elves

The Orc’s come with a premade craftrobo/silhouette  cut file so if you have one of those cutters it’s very quick to go from pdf to a couple of units of Orcs. Unfortunately an optional Cameo layer was not included but this can be addressed using a ruler and black pen. Handcutting will be a little slower, as you can see from the above pictures the Orcs have quiet a few small shapes protruding off them which increases the time it takes to cut them out. The added detail does mean the Orcs have a better overall impact on the table.

At the moment these Orcs would be great for populating a warband for a skirmish level war game eg SoBH (this will be one of my uses). They’d also be great for a GM to use in  a dungeon for a role playing game. There’s not quiet enough to populate up a full fantasy Orc army but I know Labrat has some goblins in the works which will then make these much more usable for larger army wargames. I know from reading the Bellicose rules (were these minis are intended to be used) that in the future Sanity Studios/Labrat will be working on several other additions for the Orc army such as:

  • Goblins
  • Goblin Pedal tank
  • Hobgoblins
  • Ogres
  • Shaman
  • Orc Warlord

No idea when they will be available but Sanity Studios has been filling out there troop roster for 24-36 months now so I’m fairly confident we’ll see most of the above at some point.

The Orc set is $3.95 which is good value for money, you don’t get as many different Orcs as David puts in his sets but David appears to be the exception rather than the rule when it comes to number of paper miniatures in a release. These Orcs are also more what people think off when they think Orc so for myself they are an excellent set/instant buy and lastly and most importantly you can never have to many Orc’s :).

Have fun gaming :).

Papercraft Build – Okumarts Darkfast Set Two: Wood Elves

This is the second set in Darkfast series released by Okumarts. As the numbering for the Darkfasts series starts at zero this set is labeled as Set Two: Wood Elves. You can read about the size/scaling and background information in this post to save on repetition.

As you can guess from the title of the set this set contains Wood Elves. Before I proceed any further with build review a little bit of disclosure, I’m a wood elf fan, they are one of my favorite races in any fantasy setting so be warned this review might be a little biased due to my Wood Elf tinted glasses. The Elves are drawn in what I would describe as classic D&D elf style, the elves are slightly shorter and of a thinner build than your average human.  There are a total of 18 unique miniatures in this set broken up into two sets. The first twelve you see when you open the PDF are warriors and these are printable in four colours with white hair; green, red, blue and white with an extra green set with brown hair. The second bonus set of six (turn off the five warrior layers) are available in the one colour however Okumarts has really raised the bar with them, there are four Buck (Deer) Riders and one male & one female wood elf Druid/Mage. Below are photo’s of the various miniatures avaliable in the set in various colours:

Elf Sword (M), Elf Sword (F), Elf Archer (F), Elf Archer (F), Elf Archer (M), Elf Archer (M)
Elf Archer Chainmail(M), Elf Spear (F), Elf Spear (M), Elf Spear (M), Elf Sword Heavy (M), Elf Sword Heavy (F)
Elf Buck Rider Archer (M), Elf Buck Rider Archer (M)
Elf Buck Rider Spear (M), Elf Buck Rider Spear (M)
Elf Druid/Mage (M), Elf Druid/Mage (F)

This set is stunning and extremely versatile, again the colour selections for the miniatures and the dynamic poses Okumarts has selected look really good on the tabletop. I can see a lot of uses for the miniatures in this set:

  • There are six special looking mini’s that would make good PC’s or important NPC’s, Elf Ranger Sword (M), Elf Ranger Sword (F), Elf Sword Heavy (M), Elf Sword Heavy (F), Elf Druid/Mage (M) and Elf Druid/Mage (F).
  • Both male and female variants of every miniature, except the Buck (deer) riders.
  • Extremely dynamic poses.
  • Deer Riders, great idea and well executed.
  • Lots of different troop types.

The outlines on this set are slightly more complex than the previous two with a few deer antlers, cape ends and hair spikes, however overall they are not difficult to cut out. The back to front alignment on the first twelve miniatures and the Druid/Mage is as usual excellent. I did however notice that on a couple of the buck riders there wasn’t quiet enough black border on the rear side, this was easily fixed with a black marker. Do keep that in mind when cutting the miniatures out as you will need to cut out the miniatures from the front side (face side).

The set contains a good number of figures that can be used across an RPG from PC’s, NPC’s down to simple forest border guards. It would be a great set to use to play out an encounter with elven border guards as the PC’s try to enter Wood Elven lands.  Depending on how the initial encounter played out you could have the PC’s being pursued by ardent Buck riders across the rolling plains away from the forest.

There are more than enough figures to make up a very nice and varied Warband for Song of Blades and Heros in fact with the varied figures in the set you could do up themed lists; all mounted, all ground  or a mixed wood elf warband. Elves are contained in the main Song of Blades and Heros book on page 26, I plan on using the stats for heavy cavalry with the Buck Spears and have made a new profile for the Buck Archers (see below). All the other miniatures equate out reasonably well with the stock list, with a few double ups:

  • Elf Warrior (SBH) = Elf Spear
  • Elf Archer (SBH) = Elf Archer
  • Wood Elf Warrior (SBH) = Elf Sword
  • Wood Elf Archer (SBH) = Elf Archer or Elf Archer Chainmail
  • Elf Wizard (SBH) = Elf Druid/Mage
  • Elf Hero (SBH)= Elf Sword Heavy or Elf Archer Chainmail
  • Elf Commander (SBH) = Elf Sword Heavy
  • Wood Elf Commander(SBH) = Elf Sword Heavy
  • Elf Sneak (SBH)= Not really one, Elf Spear (F) is close
  • Elf Cavalry (light) (SBH)= Elf Buck Rider Spear (better fit below)
  • Elf Cavalry (heavy) (SBH)= Elf Buck Rider Spear

Wood Elf Buck Archer (Bow and Riding Buck)
Points 50   Quality 3+  Combat 3
Special Rules Mounted, Shooter (Medium)

Being a bit of Wood Elf Fan I also had a quick look over at Wargames Unlimited – No Quarter and they have a Wood Elf Army list already (cue squeal of delight). There are not enough miniatures in this first set to have a different miniature for each profile avaliable in the wood elf army list. There are however more than enough different miniatures to put a reasonably well rounded fighting force onto the tabletop. I went through the avaliable miniatures and matched them as closely as I could to those avaliable on the list, As there are a number of duplicates don’t forget to use different cloak colours and different hair colours to represent different unit types if you need. I also added a few idea’s from other papercraft manufacturers (all free):

Individuals and Leaders

  • Elven King – none that are really special enough
  • Woodland Noble – Elf Sword Heavy or Elf Sword
  • Clan Leader – Elf Sword Heavy
  • Totem Bearer – none
  • Elven Warlock – Elf Druid/Mage (M)
  • Elven Witch – Elf Druid/Mage (F)
  • Elven Sorceress – Elf Druid/Mage (F)
  • Elven Sorceress on Unicorn – none

Core Units

Elite Units

  • Greater Tree Spirit – none ( Onemonk Halloween set tree  or WorldWorksGames Halloween tree or Eddnic’s Treant or HannesX’s Treeman)
  • Border Gaurd – Buck Riders (Spear or Archer)
  • Levy Nobility – Elf Heavy Sword
  • Woad Warriors – none
  • Eagle Riders – none
  • Huntsfolk – Elf Archer
  • Clansfolk – Elf Sword

Remembering you wont ever field every troop type in every army list that you field for a particular battle. Below I’ve put together some quick army lists as well as the number of times to print a particular page to field the army of that size(2 Okumarts miniatures only, 1 mixed list):

500 point Army

503 points total

Print: 2 of page 1 and 1 of page 2

General

Elven Sorceress (Elf Druid/Mage) – 59 pts

Core Units

Woodfolk x10 (Elf Archer) – 280pts

Elite Units

Border Guard x4 (Buck Rider) – 164pts

1000 Point Army

986 points total

Print: 3 of page 1 and 2 of page 2

General

Clan Leader (Elf Sword Heavy) – 55 pts

Individual

Elven Sorceress (Elf Druid/Mage) – 59 pts

Core Units

Schiltrons x8 (Elf Spear) – 264 pts

Woodfolk x10 (Elf Archer) – 280pts

Elite Units

Border Guard 1 x4 (Buck Rider) – 164pts

Border Guard 2 x4 (Buck Rider) – 164pts

1500 point Army

1485 points total

Print: 4 of page 1 and 2 of page 2 + 1 WWG Halloween tree

General

Woodland Noble (Elf Sword Heavy) – 92 pts

Individual

Elven Witch (Elf Druid/Mage) – 59 pts

Elven Warlock (Elf Druid/Mage) – 59 pts

Core Units

Schiltrons x8 (Elf Spear) – 264 pts

Woodfolk x8 (Elf Archer) – 224pts

Woodfolk x8 (Elf Archer) – 224pts

Fae Lorn x4 (Elf Sword) – 128pts

Elite Units

Border Guard 1 x4 (Buck Rider) – 164pts

Border Guard 2 x4 (Buck Rider) – 164pts

Greater Tree Spirit (WWG Tree) – 107pts

For me this set is a winner, one of my favorite fantasy races and usable across all three types of games I enjoy playing for a very reasonable $2.50 (USD) . I’d recommend  buying the set, no matter what game your going to use it for you will get good use out of the set.

Overall I have been very impressed with the Darkfast series and will pickup any more miniatures that Okumarts releases in this series to add to the ones above.

Have fun gaming

Papercraft Build – Okumarts Darkfast Set One: Orc Tribe

This is the second set in Darkfast series that Okumarts has released. As the numbering for the Darkfasts series starts at zero this set is labeled as Set One: Orc Tribe. I wont repeat the scaling and background information in this post but you can read all about it in the top of this post.

As you can guess from the title of the set this set contains Orcs. The Orcs are drawn more a long the lines of long snouted Orcs (Pig Orcs) slightly different to your Warhammer 40k orc but are a very nice take on the old Pig Orcs.  There are a total of 24 unique miniatures in this set broken up into two lots of twelve. The first twelve you see when you open the PDF are warriors and these are printable in four colours; red, brown, blue and green. The second bonus set of twelve (turn off the four warrior layers) are available in the one colour but consist of various Orc villager types. I’ve included a picture of all 24 miniatures with the warriors printed in various colours (There is a little lens flare/washout in the below photo’s – Sorry):

Orc Axe (M), Orc Mace (M), Orc Sword & Shield (M), Orc Sword (M), Orc Sword & Shield 2 (M), Orc Club and Chicken (M)
Orc Fancy Sword (M), Orc Axe (M), Orc Axe(M), Orc Club (M), Orc Bow & Arrow (M), Orc Bow (M)
Orc Frying Pan (F), Orc Shaman (M), Orc Thief (F), Orc Bucket (F), Orc Old Broom (F), Orc Thief (M)
Orc Boy 1, Orc Boy 2, Orc Boy Wood Sword, Orc Baby (X), Orc Boy Run, Orc Girl w/Bear

I really like this set, you can outfit a whole Orc village if you wanted  to, something I think would be impossible with metal miniatures. This could open up a world of alignment based issues for your players e.g  The PC’s just crashed into the Orc village intent on killing and plundering and find a calm village scene complete with young Orc children running around (Evil GM Grin). Okumarts has added some very nice touches to make this set stand out, such as:

  • Including Orc’s with Axes facing left and right, great as gate guards, the same yet different.
  • The female Orc thief could make for a very nice NPC or even an unusual PC character.
  • The old Shaman need I say more 🙂
  • Female orc with frying pan, reminds me of the Tangled frying pan quote “Frying pans… who knew, right?”
  • The ability to have four colours of the main warriors, you could have four different clans all fighting, with the PC’s trapped in the middle.

Okumarts has kept the outlines fairly simple although if you are cutting by hand there are a few hair, cloak and horn points you’ll need to cut around. The back to front alignment on the set is excellent which can be an issue with front/back paper miniatures. I was a little skeptical of the cloak colours when viewing the PDF on screen, particularly the green, however on print out all four colours look good. The miniatures themselves are bright and have excellent colour toning. Identification of the different miniatures on the tabletop was very easy when looking down at them from a seated position at a table. The PDF’s are not “locked” so editing them for my (or your) own personal use is easy rather than if they had been password protected.

Village Life (Huts by Worldworksgames)

I have no real issues with the set except wishing that the little craftrobo “L’s” (alignment marks) were on the pages. The only other small comment I have is that I would have liked to see a few female warrior types mixed in with males. However this is an area that metal/plastic miniature manufacturers tend to miss so no big issue. Although in the case of Orcs I can understand their military might not be an equal opportunity employer, unlike more open minded races such as Wood Elves.

This set would be great for any GM who’s players are about to invade an Orc stronghold or try and wipe out an Orc village. Print each of the warriors out in two or three different colours and the villagers once and you could set a really nice scene on the tabletop. This set will also make for a nice warband for a skirmish sized wargame (8-10 miniatures per person) such as Song of Blades and Hero’s. At this point in the Darkfast series this set can’t quiet provide enough variety of miniatures on it’s own to start to outfit a full fantasy Pig Orc army using rules such as No Quarter. Saying that you can field three different types of foot units, Hand to Hand, Archers and Polearms although you might see a little repetition in the units, to this you could add a Ballista (link) or Catapult (link or link), use the Old Shaman as a powerful magic user and use the Orc from Set Zero as a Hero, this will leave you short on some form of cavalry and a command type group. Okumarts is a big fantasy fan so I have no doubt that we will see some more Orcs in the future.

Orc Hand to Hand Unit Ready for Battle

This set is a pay set but will only set you back $2.50 USD about 10 cents a model if you don’t count colour options, less if you do. The set is excellent value for money and the artwork is of a very high standard. I’d recommend picking up a set for yourself, if you have any RPG GM’ing in your future or need a few warbands for a skirmish level wargame. However if your only use for this set is more along the lines of needing a full Fantasy Army I’d carefully weight up buying and building what you can now or simply waiting to see if further miniatures are released in the future and then pickup both sets at that point, so you can better field a more complete army to begin with.

For myself  it was no brainer buy and I’m really happy with how the miniatures look on the table. I’ll wait with crossed fingers for more variants in the future to help fill out a more complete army list for Fantasy Wargaming or possibly I’ll just mod some for my own personal use.

Next up Wood Elves.

Orc Ambush

Project Status


WWII Project First Release

80%


B-tech Buildings Five

20%


Design Victorian era City

15%


Something Different

5%


Enter your email address to follow this blog and receive notifications of new posts by email.

Join 108 other followers

Content Released Under

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License.
Please Attribute to Sirrob01 with a link back to my blog

%d bloggers like this: